Crestron DMF-CI-8 8 Card Interface 2U Rack Mount w/ 7x DM-NVX-350C

Brand: Crestron
Form Factor: Rack-Mountable
Type: Card Interface
Video Format: UHD
Model: DMF-CI-8
Connectivity: HDMI,RJ-45,SFP
MPN: DMF-CI-8,DM-NVX-350C
Features: 4K Resolution
Cards: 7 x DM-NVX-350C

Crestron DMF-CI-8 8 Card Interface 2U Rack Mount w/ 7x DM-NVX-350C HDMI Cards

In good condition and full working order

The DMF-CI-8 is a 2-space rack-mountable chassis designed to house up to eight Crestron® DM-NVX-C or DMCF series cards. Any of these cards may be installed in any slot.

KEY FEATURES:
Eight-slot card frame for Crestron® DM-NVX-C and DMCF series cards
Provides a high-density, multi-endpoint 4K video solution
Hot-swappable card serviceability
Front panel 2 inch colour LCD display and status indicators
Network setup for each card through front panel
Variable-speed fan cooling
Universal 100-240V internal power supply
2-space 19-inch rack-mountable

Specifications:
Communications
USB Host For loading of firmware via a USB mass storage device
USB Device Computer console for setup
RS-232 Computer console for setup
Card Slots
CARD SLOT ID 1 – 8 (8) Card slots;
Each slot accepts (1)DM-NVX-C series encoder/decoder card or (1) DMCF series transmitter or receiver card

Connectors:
G (1) 6-32 screw;
Chassis ground lug
100-240V~4.3-1.8A 50/60Hz (1) IEC 60320 C14 main power inlet;
Mates with removable power cord, included
CONSOLE, SERIAL (front) (1) 8-pin RJ45 female;
RS-232 computer console port
CONSOLE, USB (front) (1) USB Type-B female;
USB computer console port
USB (front) (1) USB Type A female;
Supports USB mass storage devices for firmware update
Controls & Indicators
PWR (1) Bi-colour green/amber LED, indicates operating power supplied from AC line, turns amber while booting and green when operating
STATUS (1) Bi-colour green/red LED, indicates a normal (green) or critical error (red) condition
Display (1) 2 inch (52 mm) diagonal, 220 x 176 pixels, 16-bit TFT active matrix colour LCD, displays IP address settings for each installed card
Nav Pad (1) 5-way navigation pad for menu navigation and adjustment of settings
HOME (1) Pushbutton, enters or returns to the home menu
BACK (1) Pushbutton, steps menu back one level
CARD SLOT STATUS, TX 1 – 8 (8) Green LEDs, each indicates the corresponding card is in transmitter mode
CARD SLOT STATUS, RX 1 – 8 (8) Green LEDs, each indicates the corresponding card is in receiver mode
CARD SLOT STATUS, OL 1 – 8 (8) Green LEDs, each indicates the corresponding card is online

Power
Main Power 4.3-1.8 Amps @ 100-240 Volts AC, 50/60 Hz
Power Consumption 350 Watts fully loaded
Environmental
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 1195 BTU/hr fully loaded
Acoustic Noise 43 dBA typical @ 70°F (21°C) ambient temperature
Enclosure
Chassis Metal with black finish, vented sides, fan-cooled
Front Panel Metal, black finish with polycarbonate label overlay
Mounting Freestanding or 2 RU 19-inch rack-mountable (rack ears included)
Dimensions
Height 3.47 in (89 mm)
Width 7.40 in (442 mm);
19.00 in (483 mm) with rack ears
Depth 15.43 in (392 mm)


Card Specifications:
Encoding/Decoding
Stream Type Encoder: Pixel Perfect Processing (default) or
DM-NVX-D10/D20/D200 Series;10
Decoder: Pixel Perfect Processing or DM-NVX-E10/E20
Series10
Video Resolutions Up to 4096x2160@60Hz (DCI 4K60), 4:4:4 colour sampling, HDR10 and Deep Colour support
Audio Formats Multichannel (up to 8-channel LPCM or encoded HBR 7.1 surround sound), 2-channel LPCM11
Bitrates Encoder: Fixed (200 to 950 Mbps - user specified),5
Adaptive (dependent on input resolution of the stream), or
Variable (less than 150 Mbps to maximum of 750 Mbps, dependent on content and input resolution of the stream);
Decoder: Based on the stream received from the encoder
Streaming Protocols RTP, SDP
Container MPEG-2 transport stream (.ts)
Session Initiation Multicast via secure RTSP
Copy Protection HDCP 2.2, AES-128, PKI

Video
Input Signal Types HDMI with HDR10, Deep Colour, and 4K60 4:4:4 support1, 12 (Dual-Mode DisplayPort™ interface and DVI compatible13)
Output Signal Types HDMI with HDR10, Deep Colour, and 4K60 4:4:4 support1 (DVI compatible13)
Switcher 3x1 in decoder mode (HDMI 1, HDMI 2, Stream), 2x1 in encoder mode, manual or auto-switching, breakaway audio,7 Crestron QuickSwitch HD™ technology
Scaler 4K60 4:4:4 video scaler with motion-adaptive deinterlacing, intelligent frame rate conversion, Deep Colour support, HDR10 support, widescreen format selection (zoom, stretch, maintain aspect ratio, or 1:1), video wall processing up to 8 wide x up to 8 high, static or dynamic text overlay
Copy Protection HDCP 2.2

Audio
Input Signal Types HDMI (Dual-Mode DisplayPort interface compatible13), analog stereo6
Output Signal Types HDMI, analog stereo6
Digital Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, DTS HD Master Audio, DTS:X, LPCM up to 8 channels
Analog Formats Stereo 2-channel
Analog-To-Digital Conversion 24-bit 48 kHz
Digital-To-Analog Conversion 24-bit 48 kHz
AES67 24-bit 48 kHz
Analog Performance Frequency Response: 20 Hz to 20 kHz ±0.5 dB;
S/N Ratio: >95 dB 20 Hz to 20 kHz A-weighted;
THD+N: <0.005% @ 1 kHz;
Stereo Separation: >90 dB
Analog Output Volume Adjustment −80 to +20 dB
Communications
Ethernet 100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), IEEE 802.1X, IPv4 only or both IPv4 and IPv6, Active Directory authentication, variable Multicast TTL, HTTPS web browser setup and control, Crestron 3-Series or later control system integration
USB USB 2.0 host or device signal extension and routing, Layer 2 or Layer 3
HDMI HDCP 2.2, EDID, CEC
DM NVX (via Ethernet) HDCP 2.2, AES-128 AV content encryption with PKI authentication, RTP, secure RTSP, SDP, ONVIF, IGMPv2, IGMPv3, SMPTE 2022, FEC (Forward Error Correction)
Connectors
USB DEVICE (1) USB Type B connector, female;
USB 2.0 device port;
USB signal extender port for connection to a computer or other USB 2.0 host8
USB HOST (1) USB Type A connector, female;
USB 2.0 host port;
USB signal extender port for connection to a mouse, keyboard, or any other USB 2.0 device,8
Available Power: 500 mA at 5 VDC
Ethernet 1 – 2 (2) 8-pin RJ-45 connectors, female;
100BASE-TX/1000BASE-T Ethernet ports2
Ethernet 3 (1) SFP port;
Accepts one Crestron SFP-1G Series transceiver module3
HDMI OUTPUT (1) HDMI Type A connector, female;
HDMI digital video/audio output1 (DVI compatible13)
HDMI INPUT 1 – 2 (2) HDMI Type A connectors, female;
HDMI digital video/audio inputs;1
(DVI and Dual-Mode DisplayPort interface compatible13)
AUDIO I/O (1) 5-pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line-level audio input or output;6
Input Impedance: 24k Ohms balanced/unbalanced;
Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced;
Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
Controls and Indicators
TX (1) Green LED, indicates unit is in encoder (transmitter) mode
RX (1) Green LED, indicates unit is in decoder (receiver) mode
OL (1) Green LED, indicates an online connection to a control system via Ethernet
Ethernet 1 – 2 (4) LEDs, green indicates Ethernet link status, amber indicates Ethernet activity
Ethernet 3 LNK (1) Green LED, indicates Ethernet link status
Ethernet 3 ACT (1) Green LED, indicates Ethernet activity
HDMI OUTPUT (1) Green LED, indicates video signal transmission at the HDMI output
HDMI INPUT 1 – 2 (2) Green LEDs, each indicates sync detection at the corresponding HDMI input
Construction
Plug-in card, occupies (1) card slot in a DMF-CI-8 card chassis, includes metal faceplate

1x Crestron DMF-CI-8 8 Card Interface 2U Rack Mount
7x DM-NVX-350C 4K60 4:4:4 AV Encoder/Decoder cards